Vertilon supplies several versions of their Sensor Interface Boards (SIBs) specifically designed to connect to a standard, commercially available linear or 2D position sensitive PMT.
For applications utilising multiple single element PMTs, the SDS232 SMB distribution system can be employed to provide a convenient means to connect up to 32 coaxial outputs to a PhotoniQ.
Please refer to the selection guide below or contact us if your sensor is not listed and a custom SIB is required.
High Voltage Power Supply
The HVPS series of high voltage power supplies is an upgrade option for all PhotoniQ multichannel data acquisition systems.
Fully controllable through the PhotoniQ graphical user interface and USB drivers, the HVPS option gives the user the ability to bias photomultiplier tubes, silicon photomultipliers, and avalanche photodiode arrays without the need for additional external equipment.
These power supplies are available in negative 1000V versions (HVPS001, HVPS001M); negative 1500V versions (HVPS002, HVPS002M) for PMTs and negative 100V versions (HVPS701, HVPS701M) for silicon photomultipliers and APDs. All come equipped with a 90cm cable for connection to any one of Vertilon’s sensor interface boards.
The “non M” versions of the product include an industry standard SHV plug on one end of the cable for direct connection to the front panel of the PhotoniQ. Connection to the sensor interface board is made using a specialized proprietary low-profile connector on the other end.
The “M” versions of the product are for OEM applications and are identical except that the SHV plug is replaced with a second proprietary connector for direct connection to the PhotoniQ printed circuit board.
All 64 channel versions of the PhotoniQ can be upgraded with up to two high voltage power supplies.
Data Sheet - HVPS high voltage power supply option |