Skip to main content Skip to footer
aptechnologies

Call Us On01225 780400

For APT Solutions

  • High power SMD Visible LEDs
  • LumeDEL fibre-coupled LED instruments
  • Visible 5mm LEDs
  • Broadcom NUV-MT high performance Silicon Photomultipliers
  • High Power Visible TO-package LEDs
  • Opto Diode Bi-Cell Silicon Photodiode
  • Opto Diode Near-Infrared TO-package LEDs
  • QD Laser Compact Visible Laser Modules
  • Opto Diode ODC-series Silicon PIN-TIA Receivers
  • Time-of-Flight Sensors
Previous Next

SIB064 1018top tx

 

Vertilon supplies several versions of their Sensor Interface Boards (SIBs) specifically designed to connect to a standard, commercially available linear or 2D position sensitive PMT.

 

For applications utilising multiple single element PMTs, the SDS232 SMB distribution system can be employed to provide a convenient means to connect up to 32 coaxial outputs to a PhotoniQ.

 

Please refer to the selection guide below or contact us if your sensor is not listed and a custom SIB is required.         

 

  

 

PDF icon

Selection Guide - 16 & 32 channel PMT sensor interface boards

PDF icon

Selection Guide - 64 channel PMT sensor interface boards

PDF icon

Data Sheet - SIB064A interface board, H8500/H10966 8x8 MAPMT

PDF icon

User Manual - SIB064A sensor interface board

PDF icon

Data Sheet - SIB064A-1018 Anger logic interface board, H8500/H10966 PMT

PDF icon

User Manual - SIB064A-1018 sensor interface board

PDF icon

Data Sheet - SIB116A interface board, H8711 series 4x4 MAPMT

PDF icon

DataSheet - SIB164A interface board, H7546B Series 8x8 MAPMT

PDF icon

User Manual - SIB164A sensor interface board

PDF icon

Data Sheet - SIB164-1018 Anger logic interface board, H7546B 8x8 MAPMT

PDF icon

User Manual - SIB164-1018 Anger logic interface board

PDF icon

Data Sheet - SIB264 interface board, XP85013 series 8x8 MCP-PMT

PDF icon

User Manual - SIB264 sensor interface board 

PDF icon

Data Sheet - SDS232 32-channel SMB distribution system for single element PMTs

PDF icon

Data Sheet - SIB016 interface board, R5900U-L16 16-anode linear PMT

PDF icon

Data Sheet - SIB032 interface board, H7260 32-anode linear PMT

PDF icon

Data Sheet - SIB032D interface board, H7260, Ultra-Low Current Version

PDF icon

DataSheet - SIB232 interface board, H7260 32-anode linear PMT

PDF icon

User Manual - SIB232 sensor interface board 

PDF icon

Data Sheet - SIB516 interface board, H10515B Series 16-anode linear PMT

 

High Voltage Power Supply

The HVPS series of high voltage power supplies is an upgrade option for all PhotoniQ multichannel data acquisition systems.

 

Fully controllable through the PhotoniQ graphical user interface and USB drivers, the HVPS option gives the user the ability to bias photomultiplier tubes, silicon photomultipliers, and avalanche photodiode arrays without the need for additional external equipment.

 

These power supplies are available in negative 1000V versions (HVPS001, HVPS001M); negative 1500V versions (HVPS002, HVPS002M) for PMTs and negative 100V versions (HVPS701, HVPS701M) for silicon photomultipliers and APDs. All come equipped with a 90cm cable for connection to any one of Vertilon’s sensor interface boards.

 

The “non M” versions of the product include an industry standard SHV plug on one end of the cable for direct connection to the front panel of the PhotoniQ. Connection to the sensor interface board is made using a specialized proprietary low-profile connector on the other end.

 

The “M” versions of the product are for OEM applications and are identical except that the SHV plug is replaced with a second proprietary connector for direct connection to the PhotoniQ printed circuit board.

 

All 64 channel versions of the PhotoniQ can be upgraded with up to two high voltage power supplies.

 

PDF icon Data Sheet - HVPS high voltage power supply option